‘*Product name (PRODUCT): 2026 ATEEZ FANMEETING ATINYS VOYAGE: TINY MYSTERY LIGHT STICK DECO SET (8TYPE)
*Material: PVC, Silicone, Paper
*SIZE: DECO BAND 7x7cm (±2cm), STICKER 100x150mm, PHOTOCARD 54x86mm
* Country of Manufacture: China (MADE IN CHINA)
[Precautions for Handling]
1. For the reflective sticker, remove any foreign matter from the surface to be attached, then rub it sufficiently so that the sticker adheres to the transparent film. Afterward, attach the sticker to the surface with the sticker still attached to the transparent film, and finally, remove only the transparent film to use it.
2. If the reflective sticker is not pressed firmly, it may remain on the white backing instead of the transfer film. Before peeling off the transparent film, please press firmly with your hand or a card, then peel it off slowly.
3. Laser marks on the backing of the reflective sticker are traces resulting from the manufacturing process and do not affect the quality or use of the sticker. Furthermore, as they do not constitute a defect, they are not grounds for exchange or return.
4. Please be careful as the adhesive strength of the sticker may decrease on severely curved or rough surfaces.
5. The product may be damaged if pulled or twisted excessively.
6. Please store away from direct sunlight, high temperatures, and humid places.
7. There may be a size error (±2cm) for the deco band depending on the measurement method.
8. Due to the nature of printed materials, minor stains, scratches, and warping may occur.
9. Packages and packaging materials are intended for product protection, and scratches, dents, or minor damage occurring during the manufacturing, packaging, or shipping process do not constitute grounds for defects.
This product is intended for use by ages 14 and up and is not for children.
This product is eligible for exchange or compensation in accordance with the Consumer Dispute Resolution Standards notified by the Fair Trade Commission.
‘[Precautions]
1. Before applying the reflective sticker, remove any dust or debris from the surface. Firmly rub the sticker to ensure it adheres to the transparent transfer film. Apply the sticker to the desired surface with the transfer film attached, then carefully peel off only the transparent film.
2. If the reflective sticker is not pressed down firmly enough, it may remain on the white backing paper instead of transferring to the transfer film. Before removing the transparent transfer film, firmly press over the entire surface using your hand or a card, then slowly peel off the film.
3. Laser marks on the backing paper of reflective stickers are a normal result of the manufacturing process. They do not affect the quality or usability of the sticker and are not considered defects. Therefore, they are not eligible for exchange or return.
4. Do not apply the sticker to heavily curved or rough surfaces, as adhesion may be reduced.
5. Do not pull or twist the product with excessive force, as this may cause damage.
6. Store the product away from direct sunlight and high temperature or high humidity.
7. The size of the deco band may vary depending on the measurement method (±2 cm).
8. Printed materials may have minor stains, scratches, or slight warping due to the nature of the product. These are not considered defects.
9. The package and packing materials are intended solely to protect the product. Minor scratches, dents, or slight damage incurred during manufacturing, packaging, or shipping are not considered defects.
*This product is intended for users aged 14 years and older and is not a children’s product.*
‘*Product name (PRODUCT): 2026 ATEEZ FANMEETING ATINYS VOYAGE: TINY MYSTERY LIGHT STICK DECO SET (8TYPE)*Material: PVC, Silicone, Paper*SIZE: DECO BAND 7x7cm (±2cm), STICKER 100x150mm, PHOTOCARD 54x86mm* Country of Manufacture: China (MADE IN CHINA)[Precautions for Handling]1. For the reflective sticker, remove any foreign matter from the surface to be attached, then rub it sufficiently so that the sticker adheres to the transparent film. Afterward, attach the sticker to the surface with the sticker still attached to the transparent film, and finally, remove only the transparent film to use it.2. If the reflective sticker is not pressed firmly, it may remain on the white backing instead of the transfer film. Before peeling off the transparent film, please press firmly with your hand or a card, then peel it off slowly.3. Laser marks on the backing of the reflective sticker are traces resulting from the manufacturing process and do not affect the quality or use of the sticker. Furthermore, as they do not constitute a defect, they are not grounds for exchange or return.4. Please be careful as the adhesive strength of the sticker may decrease on severely curved or rough surfaces.5. The product may be damaged if pulled or twisted excessively.6. Please store away from direct sunlight, high temperatures, and humid places.7. There may be a size error (±2cm) for the deco band depending on the measurement method.8. Due to the nature of printed materials, minor stains, scratches, and warping may occur.9. Packages and packaging materials are intended for product protection, and scratches, dents, or minor damage occurring during the manufacturing, packaging, or shipping process do not constitute grounds for defects.This product is intended for use by ages 14 and up and is not for children.This product is eligible for exchange or compensation in accordance with the Consumer Dispute Resolution Standards notified by the Fair Trade Commission.‘[Precautions]1. Before applying the reflective sticker, remove any dust or debris from the surface. Firmly rub the sticker to ensure it adheres to the transparent transfer film. Apply the sticker to the desired surface with the transfer film attached, then carefully peel off only the transparent film.2. If the reflective sticker is not pressed down firmly enough, it may remain on the white backing paper instead of transferring to the transfer film. Before removing the transparent transfer film, firmly press over the entire surface using your hand or a card, then slowly peel off the film.3. Laser marks on the backing paper of reflective stickers are a normal result of the manufacturing process. They do not affect the quality or usability of the sticker and are not considered defects. Therefore, they are not eligible for exchange or return.4. Do not apply the sticker to heavily curved or rough surfaces, as adhesion may be reduced.5. Do not pull or twist the product with excessive force, as this may cause damage.6. Store the product away from direct sunlight and high temperature or high humidity.7. The size of the deco band may vary depending on the measurement method (±2 cm).8. Printed materials may have minor stains, scratches, or slight warping due to the nature of the product. These are not considered defects.9. The package and packing materials are intended solely to protect the product. Minor scratches, dents, or slight damage incurred during manufacturing, packaging, or shipping are not considered defects.*This product is intended for users aged 14 years and older and is not a children’s product.*